Anti-Theft & Tamper Design — Anti-High temperature lock core, ABS fire-retardant materials,stainless steel lock, all copper induction coil, fiberglass circuit boards, imported chips, very power-saving and stable, have excellent performance and stability.
EASY installed — Don’t need drill a hole on the door; 90 KG force-resistance!
Reliable Quality — widely used in the wardrobe,shoe,filing cabinets,drawers, wine cabinets, furniture cabinets and other safety place needed.
Applicable to drawers, single-opening doors, double-opening doors, sliding wardrobe door.
Buyers need to know: If the thickness of the door exceeds 2.5 cm, please note, or contact customer service instructions!
New Home Stealth Cabinet Locks Cabinet Wardrobe Sensor Door Locks Electronic Lock File Cabinets Inductive Lock Drawer invisible (no need for punching, only 2 batteries)
Pro-set before shipment, the battery can be used to open the card!
Automatic pin lock cylinder, identify EMTK4100 4200 card, automatic authorization, no software management, sub-management card, total card, guest card 3 permissions, card automatic lock cylinder automatic release, plus elastic contraction lever assisted opening the door, light operation When you close the door, you only need to lightly close the door to lock it automatically.
ABS plastic parts sealed injection molding, waterproof, anti-smashing, safe and reliable. Its motor life is greater than 100,000 times, its split-type lock structure is simple to install, its inductance is less than 8 microamps (static), dynamic less than 150 mA For all kinds of wooden cabinets.
EM Cabinet Lock Instructions (2 batteries)
Remarks: It is set up before leaving the factory and the battery can be opened using the card!
1. Card Category:
1) Cards fall into three categories: Management Cards and Common Keys
2) The management card is used to add and delete common keys, and the management card can be unlocked in any mode.
2. Setting function:
1) Initialization: Press and hold the switch button on the PCB for about 3 seconds. The buzzer will sound for a long time. The default is single-open mode.
2) When the door lock is empty, the management card can be set directly and only 3 can be set.
3) Change the operating mode. Press the button once to switch the operation mode. The buzzer sounds a single sound and the two sounds indicate the dual card mode.
4) After reading the management card, the door lock is opened, and the buzzer continues to ring for a short period of time. During this time, an ordinary key can be added.
The first card added is the waiter’s card and the others are ordinary keys. If it is added successfully, it will ring once; if the added key already exists, it will ring twice, and when the storage area is full, it will ring four times.
5) During the non-setting period, touch any invalid card and make a short call three times.
3. Clear function:
1) Wait for 5 seconds after consecutively reading the management card three times to delete all normal keys
2) You can delete all management cards by reading the management card consecutively five times.
3) Press and hold the switch button on the PCB board for more than 3 seconds. The buzzer will beep for a long time and the door lock will be initialized. All set card information will be cleared.
4. Low voltage indication:
After the card is touched, if there is a long beep after unlocking, it means that the battery voltage is insufficient. At this time, the lock can be used about 50 times. Please replace the battery in time.
1 x Lock(Not Included Battery)
1 x IC Card Sensor
1 x Bag Screw
3 x Blue Card Sensor