This product uses Micro_USB cable for charging, please fully charge it before use. This product can hold up to 40 fingerprints. The first two fingerprints entered are the administrator by default, and numbers 3-40 are users; the product defaults to experience mode when it leaves the factory, and any fingerprint can be unlocked
Light definition:
Red light flashes once: single entry failure/verification failure
Green light flashes once: a single entry is successful/verification passed
Green light on for 1 second: successful fingerprint registration / successful deletion
Blue light flashing: fingerprint input status
Steady blue light: verify administrator
Steady red: fingerprint removal status, verifying the administrator
Administrator registration:
Press the fingerprint head for 5 seconds and wait for the blue light to flash. Release your finger at this time and the blue light is always on, indicating that you have entered the registration mode.
Press the fingerprint head 5 times in a row with the finger to be entered (flashing the green light once indicates that the entry is successful, flashing red once indicates that the entry has failed), remove the finger and press again. After 5 consecutive entries, the green light will stay on for 1 second to complete the fingerprint The registration is successful.
You can change different angles and move the finger position when entering the fingerprint
User fingerprint entry:
When the administrator has been entered, press and hold the fingerprint sensor for 8 seconds, and wait for the blue light to flash. At this time, release your finger. After the administrator is verified, the blue light is on, indicating that you can start to enter your finger;
2. Press the fingerprint head 5 times in a row with the finger to be entered (flashing the green light once indicates that the entry is successful, flashing red once indicates that the entry has failed), remove the finger and press again, and the green light will stay on for 1 second after 5 consecutive entries. The fingerprint entry is completed and the registration is successful.
You can change different angles and move the finger position when entering the fingerprint
Restore factory settings
Press any finger for 12 seconds. During this period, the blue light will flash and wait for the red light to flash. At this time, release your finger and after the administrator passes the verification, the green light will be on for 1 second to indicate that all fingerprints have been deleted successfully and the factory mode is restored.
note:
Before applying for after-sales service, the user must restore the padlock to the factory mode, otherwise the after-sales service will not be possible
Unlock
The registered fingerprint can be unlocked immediately after identification, and any fingerprint in the factory mode can be unlocked.
Charging display
The red light is on during charging, and the green light is on when fully charged.
Support 360゜ any direction to press fingerprint recognition;
Resolution 508DPI; ESD: +/-12KV air, +/-8KV contact;
FRR: <1% FAR: <0.002%; recognition time 300ms
Working environment: temperature -20゜C~70゜C; humidity 40%~85%RH (no condensation)
Storage environment: temperature -40゜C~80゜C; humidity <85%RH (no condensation)
Working current: <=200MA; Standby current: <=15uA;
Battery capacity: 150MAH polymer lithium battery, up to 6 months standby
The maximum number of unlocking can be up to 2500. Battery shortage can
Visits: 1
Works great
Super